P2000 Roller System
Tough, High Traction, Non-Marking
Features:
- Our new dual duro roller System features six core sizes plus special mounts. 18 different diameter covers in 5 standard hardness options compliment rollers up to 12" long.
- Rollers can be cut to length to adapt to your special needs. By casting the bores, keyways and special mounts WRC can provide economic and engineering advantages over rollers that would otherwise be machined or fabricated and then covered.
- WRC's P2000 roller system gives you the flexibility to create custom rollers from standard tooling. Our dual duro roller system features an economical one-way design that eliminates the need to return your rollers for recover.
Current Available Tooling:
| SERIES | CORE DIAMETER MM | COVER DIAMETER MM | MAXIMUM AVAILABLE WIDTH | MAXIMUM AVAILABLE BORE & KEY |
| P38 | 38 | 50 60 |
12" 12" |
1" x 1/4" key or 1-1/4" x no key |
| P51 | 51 | 70 80 90 |
12" 12" 12" |
1-1/4" x 1/4" key or 1-1/2" x no key |
| P80 | 80 | 100 110 120 |
12" 12" 12" |
2" x 1/2" key or 2-1/2" x no key |
| P110 | 110 | 130 140 150 |
12" 12" 12" |
40mm x 12mm key or 1-7/8" x no key |
| P140 | 140 | 160 170 180 |
12" 12" 12" |
2" x 1/2" key or 2-1/2" x no key |
| P170 | 170 | 190 200 205 210 220 |
12" 12" 12" 12" 12" |
60mm x 18mm key or 3" x no key |
|
Hardness of core is 75 Duro, D Shore. Hardness of outer covers are 95, 84, * 75, 70, 60 & 50 Duro, A Shore. * Currently the limited production of 75 duro may extend lead time. Special mounts, custom parts and diameters not shown quoted upon request. |
||||
